EL2

Knelsen EL-Anchor-U-profile

EL-Anchor - U - Profile - The Simple Solution
• simple and fast mounting of windows in the insulation layer
• suitable for all systems (aluminium, wood, plastic)
• the direct screwing through the window into the anchor is a
proved wedging
• simple handling during modifications or replacing the window
• certified mounting to the masonry (hollow brick, aerated concrete brick)
• Window mounting in accordance with resistance class RC2 from a material thickness of 2.5 mm
• suitable for fall-proof window mounting
• maximum load tested by ift-Rosenheim

Description

Installation instruction: Preparation: 6.0 mm holes must be pre-drilled into the window frame.

  1. Step 1: Place the window frame into the opening, align it and fix it by using, for example, wedges and blocks.
  2. Step 2: Screw the Ø7.5 mm Window Mounting Screw through the window frame until the tip of the screw becomes visible in the window seam.
  3. Step 3: The EL-Anchor with the 6.0 mm drilled hole has to be placed over the tip of the screw and the Window Mounting Screw is screwed directly into the anchor. This connec-tion with the Ø7.5 mm Window Mounting Screw is a wedging and RC2 resistance class approved.
  4. Step 4: Connect the EL-Anchor with at least two mounting points to the masonry.
  • A "simple solution" is also given when removing windows that were installed with the EL-Anchor. Simply remove the 7.5mm Window Mounting Screw. The new window is mounted onto the existing EL-Anchors. If the drilled holes no longer fit, new holes can simply be drilled into the EL-Anchor and the masonry.
Article-No Article name (mm) Units
K-405100 EL-150x1,5 U-profiil 50
K-405100-1 EL-150x2,5 U-profiil 50
K-405102 EL-200x1,5 U-profiil 50
K-405104 EL-200x2,5 U-profiil 50
K-405104-1 EL-200x3,0 U-profiil 50
K-405105 EL-250x1,5 U-profiil 50
K-405106 EL-250x2,5 U-profiil 50
K-405106-1 EL-250x3,0 U-profiil 50
K-405107 EL-300x3,0 U-profiil 50
K-405108 EL-350x3,0 U-profiil 50

ift-Rosenheim verification number

Tested for loads in the window layer: 11-003442-PR06 PB-K26-09-de-01, 14-002150-PR01 PB-K26-09-de-01, 18-003796-PR01 PB-K26-09-de-01

Maximum load / overhang A

Material thickness 30 mm 50 mm 70 mm 100 mm 130 mm 160 mm
1,5 mm 136 kg 80 kg 44 kg - - -
2,5 mm 175 kg 110 kg 58 kg 27 kg 14 kg 8 kg
3,0 mm 208 kg 160 kg 114 kg 44 kg 27 kg 14 kg

ift-Rosenheim verification number

Tested for loads which are perpendicular to the window layer: 18-000650-PR01 PB 04-K26-09-de-01

Material thickness tested joint width e Maximum load
2,5 mm 20mm 157 kg

PDF Product Sheet Fixing Points and Mounting
Back to: Bracket